Page Header

Reducing Losses Through Defect and Impact Analysis in Waste Electrical Power Generation : Case Study of A Waste Electrical Power Plant, Khon Kaen Province

Chanachon Tupvichin, Panutporn Ruangchoengchum

Abstract


This research aimed to study the loss in energy from waste process, analyze causes, and provide a guideline to reduce the loss by analyzing defects and effects.  This study was based on 20 key informants from the waste electrical power plant in Khon Kaen, as a case study.  The data were analyzed with Process Flow Chart, Pareto chart, Risk Assessment, Cause and Effect matrix, Defect and Impact Analysis (FMEA), and Relationship Diagrams. The results showed the loss in the energy from waste process came from the stoppage of waste incineration. The study found that the reverse and forward stepping grate machine was a cause of the loss.  As a result of the analysis, the loss reduction by analyzing the defects and the impact, it suggested increasing frequency of monitoring the distance (GAP) of the Grate Bar, installation thermometer under the continuous combustion chamber, and checking cleaning fan system every two hours . These guidelines could reduce loss in the energy from waste process from 9.07% to only 0.54%, or equal to 19.08 million baht. Therefore, the result of this research can be used as a policy recommendation to provide a cost effective way to reduce the loss in the process of energy generating from waste efficiently

Keywords


<span>Failure Mode Effects and Analysis (FMEA); osses reduction; the power generation process </span><span>from waste energy</span>

[1] Department of Pollution Control, "Status of gaebage remaining in 2016 - 2017," http:// infofile.pcd.go.th/waste/wsthaz_annual59. pdf, Thailand, 2017. (in Thai)

[2] N. Sripui and P. Ruangchoengchum, "Guideline to improve the Efficiency of Organizing Hotel Business Conferences for Mice City in Amphoe Mueang Khon Kean Province," Technical Education Journal King Mongkut's University of Technology Nort Bangkok, vol. 7 , no. 2, pp. 102-111, 2016. (in Thai)

[3] Alliance Clean Power Company Limited, "Annual Report 2017," Thailand, 2018. (in Thai)

[4] T. T. Wen and C. K. Kuan, "An analysis of power generation from municipal solid waste," Energy, vol. 35, no. 12, pp. 4824-4830, 2010.

[5] C. Hefa, Z. Yanguo and L. Qinghai, "Municipal Solid Waste Fueled Power Generation in China: A Case Study," Environmental Science and Technology, vol. 41, no. 21, pp. 7509-7515, 2007.

[6] J. Yan and T. Chen, "Evaluation of PCDD/Fsemission from fluidized bed incineratiors co-firing MSW with coal in China," Journal of Hazardous Materials, vol. 135, no. 1, pp. 47-51, 2006.

[7] E. Jannelli and M. Minutillo, "Simulation of the flue gas cleaning system of and RDF incineration power plant," Waste Management, vol. 27, no. 5, pp. 684-690, 2007.

[8] L. Morselli and M. Bartoli, "Tool for evaluation of impact associated with MSW incineration: LCA and integrated environmental monitoring system," Waste Management, vol. 25, no. 2, pp. 191-196, 2005.

[9] F. Yun, Z. Fu-Shen, Z. Jianxin and L. Zhengang, "Effective utilization of waste ash from MSW and coal co-combustion power lplant - Zeolite synthesis," Journal of Hazardous Material, vol. 153, no. 2, pp. 382-388, 2008.

[10] A. Bernadette and L. Yuri, "The environmental comparison of landfilling vs. incineration of MSW accounting for waste diversion," Waste Management, vol. 32, no. 5, pp. 1019-1030, 2012.

[11] K. Phoipanitjajurn, Failure Mode and Effects Analysis: FMEA, Bangkok: Technology Promotion Association (Thailand - Japan), 2013. (in Thai)

[12] S. Ketsarapong, "AN APPLICATION OF FMEA TECHNIQUE FOR ANALYSIS AND DEFECT REDUTION IN AUTOMOTIVE BODY STEEL PRESS PARTS," Sripatum University, Bangkean Campus, Thailand, 2550. (in Thai)

[13] S. Wongjirattkarn, "Improvement of Preventive Maintenance Planning of an Automobile," The Journal of KMUTNB, vol. 23, no. 3, pp. 643-653, 2013. (in Thai)

[14] Y.-C. Chen and W.-F. Wu, "Constructing an effective prevention mechanism for MSW lifecycle using failure mode and effects analysis," Waste Management, vol. 46, no. 1, pp. 646-652, 2015.

Full Text: PDF

Refbacks

  • There are currently no refbacks.


ISSN: -