Evaluation of the Possibility for Using Polypropylene/Graphene Composite as Bipolar Plate Material Instead of Polypropylene/Graphite Composite

Hide about the authors

Kannika Onyu
Department of Industrial Chemistry, Faculty of Applied Science, King Mongkut’s University of Technology North Bangkok, Bangkok, Thailand

Rungsima Yeetsorn
Department of Industrial Chemistry, Faculty of Applied Science, King Mongkut’s University of Technology North Bangkok, Bangkok, Thailand

Michael Fowler
Department of Chemical Engineering, Faculty of Engineering, University of Waterloo, Ontario, Canada

Aiping Yu
Department of Chemical Engineering, Faculty of Engineering, University of Waterloo, Ontario, Canada

Yun Seok Jun
Department of Chemical Engineering, Faculty of Engineering, University of Waterloo, Ontario, Canada

Chaiwat Prapainainar
Department of Chemical Engineering, Faculty of Engineering, King Mongkut’s University of Technology North Bangkok, Bangkok, Thailand

Walaiporn Prissanaroon-Ouajai
Department of Industrial Chemistry, Faculty of Applied Science, King Mongkut’s University of Technology North Bangkok, Bangkok

Refbacks

There are currently no refbacks.

Information

Published by Academic Enhancement Department, part of the Office of the president King Mongkut's University of Technology North Bangkok.

Username
Password
Remember me