Sustainable Natural Fibers for Environmental-friendly Materials
Abstract
[1] M. Jawaid and S. Siengchin, “Hybrid composites: A versatile materials for future,” Applied Science and Engineering Progress, vol. 12, no. 4, p. 223, doi: 10.14416/j.asep.2019.09.002.
[2] S. Mahesh, M. Chandrasekar, R. Asokan, Y. C. Mouli, K. Sridhar, V. V. K. Vamsi, M. D. Varma, and P. S. Venkatanarayanan, “Influence of incident energy on sisal/epoxy composite subjected to low velocity impact and damage characterization using ultrasonic C-scan,” Applied Science and Engineering Progress, vol. 15, no. 1, 2022, Art. no. 5520, doi: 10.14416/j.asep.2021.07.005.
[3] S. M. Rangappa, S. Siengchin, and H. N. Dhakal, “Green-composites: Ecofriendly and sustainability,” Applied Science and Engineering Progress, vol. 13, no. 3, pp. 183–184, 2020, doi: 10.14416/j. asep.2020.06.001.
[4] M. Puttegowda, H. Pulikkalparambil, and S. M. Rangappa, “Trends and developments in natural fiber composites,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 543–552, 2021, doi: 10.14416/j.asep.2021.06.006.
[5] A. Dhandapani, S. Krishnasamy, T. Ungtrakul, S. M. K. Thiagamani, R. Nagarajan, C. Muthukumar, and G. Chinnachamy, “Desirability of triboperformance of natural based thermoset and thermoplastic composites: A concise review,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 606–613, 2021, doi: 10.14416/ j.asep.2021.07.001.
[6] B. D. S. Deeraj, K. Joseph, J. S. Jayan, and A. Saritha, “Dynamic mechanical performance of natural fiber reinforced composites: A brief review,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 614–623, 2021, doi: 10.14416/j.asep.2021.06.003.
[7] K. Setswalo, N. Molaletsa, O. P. Oladijo, E. T. Akinlabi, S. M. Rangappa, and S. Siengchin, “The influence of fiber processing and alkaline treatment on the properties of natural fiberreinforced composites: A review,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 632–650, 2021, doi: 10.14416/ j.asep.2021.08.005.
[8] A. Dogru, A. Sozen, G. Neser, and M. O. Seydibeyoglu, “Effects of aging and infill pattern on mechanical properties of hemp reinforced PLA composite produced by fused filament fabrication (FFF),” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 651–660, 2021, doi: 10.14416/j.asep.2021.08.007.
[9] V. Dogra, C. Kishore, A. Verma, A. K. Rana, and A. Gaur, “Fabrication and experimental testing of hybrid composite material having biodegradable bagasse fiber in a modified epoxy resin: Evaluation of mechanical and morphological behavior,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 661–667, 2021, doi: 10.14416/ j.asep.2021.06.002.
[10] A. C. Özcan, K. Y. Şanlıtürk, G. Genc, and H. Körük, “Investigation of the sound absorption and transmission loss performances of green homogenous and hybrid luffa and jute fiber samples,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 1–12, 2021, doi: 10.14416/j.asep.2021.04.005.
[11] N. A. Nasimudeen, S. Karounamourthy, J. Selvarathinam, S. M. K. Thiagamani, H. Pulikkalparambil, S. Krishnasamy, and C. Muthukumar, “Mechanical, absorption and swelling properties of vinyl ester based natural fibre hybrid composites,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 680– 688, 2021, doi: 10.14416/j.asep.2021.08.006.
[12] M. E. Hoque, A. M. Rayhan, and S. I. Shaily, Natural fiber-based green composites: Processing, properties and biomedical applications,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 689–718, 2021, doi: 10.14416/j.asep. 2021.09.005.
[13] C. Santos, T. Santos, M. Aquino, and R. F. L. Zillio, “Statistical study of the influence of fiber content, fiber length and critical length in the mechanical behavior of polymeric composites reinforced with Carica Papaya Fibers (CPFs),” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 719–726, doi: 10.14416/j.asep. 2021.07.002.
[14] T. P. Sathishkumar, P. Navaneethakrishnan, and P. Maheskumar, “Thermal stability and tribological behaviors of Tri-fillers reinforced epoxy hybrid composites,” Applied Science and Engineering Progress, vol. 14, no. 4, pp. 727–737, 2021, doi: 10.14416/j.asep.2021.08.002.
[15] S. M. Rangappa, S. Siengchin, J. Parameswaranpillai, M. Jawaid, C. I. Pruncu, and A. Khan, “A comprehensive review of techniques for natural fibers as reinforcement in composites: Preparation, processing and characterization,” Carbohydrate Polymers, vol. 207, pp. 108–121, 2019.
[16] S. M. Rangappa, S. Siengchin, J. Parameswaranpillai, M. Jawaid, and T. Ozbakkaloglu, “Lignocellulosic fiber reinforced composites: Progress, performance, properties, applications, and future perspectives,” Polymer Composites, 2021, pp. 1–47, doi: 10.1002/pc.26413.
[17] S. M. Rangappa, P. Madhu, M. Jawaid, P. Senthamaraikannan, S. Senthil, and S. Pradeep, “Characterization and properties of natural fiber polymer composites: A comprehensive review,” Journal of Cleaner Production, vol. 172, pp. 566–581, 2018.
[18] G. Rajeshkumar, S. A. Seshadri, G. L. Devnani, S. M. Rangappa, S. Siengchin, J. P. Maran, N. A. Al-Dhabi, P. Karuppiah, V. A. Mariadhas, N. Sivarajasekar, and A. R. Anuf, “Environment friendly, renewable and sustainable poly lactic acid (PLA) based natural fiber reinforced composites–A comprehensive review,” Journal of Cleaner Production, vol. 310, 2021, Art. no. 127483.
[19] G. Rajeshkumar, S. A. Seshadri, S. Ramakrishnan, S. M. Rangappa, S. Siengchin, and K. C. Nagaraja, “A comprehensive review on natural fiber/ nanoclay reinforced hybrid polymeric composites: Materials and technologies,” Polymer Composites, vol. 42, no. 8, pp. 3687–3701, 2021.
[20] P. Jagadeesh, M. Puttegowda, S. M. Rangappa, and S. Siengchin, “A review on extraction, chemical treatment, characterization of natural fibers and its composites for potential applications,” Polymer Composites, vol. 42, no. 12, pp. 6239–6264, 2021.
DOI: 10.14416/j.asep.2022.02.004
Refbacks
- There are currently no refbacks.
.png){kind=logo}
