Page Header

Home > Vol 15, No 4 (Oct.–Dec. 2022) > Waramit

Experimental Investigation to Evaluate the Effective Moisture Diffusivity and Activation Energy of Cassava (Manihot Esculenta) under Convective Drying

Pathiwat Waramit, Bundit Krittakom, Ratinun Luampon

Abstract


Investigation of effective moisture diffusivity (Deff) and activation energy (Ea) of cassava were conducted under convective drying at temperature and velocity of 60, 70 and 80 °C, and 1.0, 1.5 and 2.0 m/s, respectively. In the experiment, cassava was sliced into 3 mm-thickness and dried under given conditions until mass was saturated. Deff and Ea were described by Fick’s second law and Arrhenius-type equation, respectively. The experimental results indicated that the increase in Deff was significantly affected by increasing the hot air temperature and velocity. The slope method was used to calculate average Deff, and results were found to range from 3.83 × 10–9 – 9.86 × 10–9 m2/s. The Ea was found to decrease with an increase in hot air velocity, ranging from 21.23– 24.92 kJ/mol. Additionally, Moisture content (Mw) and Drying rate (DR) were also used to describe the drying kinetics. From the experimental results, Mw and DR decreased with an increase in drying time. DR increased with an increase in temperature and velocity causing Mw to rapidly decrease and drying time to reduce. The highest DR was found to be 0.55 gwater/min at temperature of 80 °C and velocity of 2.0 m/s.

Keywords



[1] D. Lestari, Y. Liandro, E. Ang, and M. T. A. P. Kresnowati, “Shelf-life evaluation of packaged fermented cassava flour,” Journal of Engineering and Technological Sciences, vol. 51, no. 1, pp. 64– 82, 2019.

[2] Office of Agricultural Economics. “Tapioca export data,” (2020). [Online]. Available: http://impexp. oae.go.th/service/export.php

[3] P. Pornpraipech, M. Khusakul, R. Singklin, P. Sarabhorn, and C. Areeprasert, “Effect of temperature and shape on drying performance of cassava chips,” Agriculture and Natural Resources, vol. 51, no. 5, pp. 402–409, 2017.

[4] A. A. Olufayo and O. J. Ogunkunle, “Natural drying of cassava chips in the humid zone of Nigeria,” Bioresource Technology, vol. 58, pp. 89– 91, 1996.

[5] M. Jokiel, M. Bantle, C. Kopp, and E. H. Verpe, “Modelica-based modelling of heat pump-assisted apple drying for varied drying temperatures and bypass ratios,” Thermal Science and Engineering Progress, vol. 19, p. 100575, 2020.

[6] M. Aghbashlo, H. Mobli, S. Rafiee, and A. Madadlou, “A review on exergy analysis of drying processes and systems,” Renewable & Sustainable Energy Reviews, vol. 22, pp. 1–22, 2013.

[7] R. Saleh, B. Kulig, A. Emiliozzi, O. Hensel, and B. Sturma, “Impact of critical control-point based intermittent drying on drying kinetics and quality of carrot (Daucus carota var. laguna),” Thermal Science and Engineering Progress, vol. 20, pp. 1–14, 2020.

[8] M. Beigi, “Hot air drying of apple slices: Dehydration characteristics and quality assessment,” Heat and Mass Transfer, vol. 52, no. 8, pp. 1435–1442, 2016.

[9] D. Manish and N. K. Pareek, “Effective moisture diffusivity of pomegranate arils undergoing microwave-vacuum drying,” Journal of Food Engineering, vol. 122, pp. 117–121, 2014.

[10] S. S. Kim and S. R. Bhowmik, “Effective moisture diffusivity of plain yogurt undergoing microwave vacuum drying,” Journal of Food Engineering, vol. 24, pp. 137–148, 1995.

[11] M. A. Rao, S. H. Sayed, and K. D. Ashim, Engineering Properties of Foods, 3rd ed. Florida: CRC Press, 2005.

[12] G. D. Saravacos and Z. B. Maroulis, Transport Properties of Foods. New York: Marcel Dekker, 2001.

[13] I. Doymaz and M. Pala, “The thin-layer drying characteristics of corn,” Journal of Food Engineering, vol. 60, no. 2, pp. 125–130, 2003.

[14] I. Doymaz, “Convective air drying characteristics of thin layer carrots,” Journal of Food Engineering, vol. 61, pp. 359–364, 2004.

[15] G. P. Sharma, R. C. Verma, and P. B. Pathare, “Thin-layer infrared radiation drying of onion slices,” Journal of Food Engineering, vol. 67, pp. 361–366, 2005.

[16] M. Silvina, “Drying and rehydration kinetics of mangoes: Solute effects,” International Journal of Innovative Research in Engineering & Management, vol. 2, no. 6, pp. 71–48, 2015.

[17] L. Seremet, E. Botez, O. V. Nistor, F. Gogus, D. G. Andronoiu, and G. D. Mocanu, “Influence of drying condition on the effective diffusivity and activation energy during convective air and vacuum drying of pumpkin,” The Annals of the University Dunarea de Jos of Galati, vol. 39, no. 2, pp. 20–29, 2015.

[18] L. C. Diego, T. F. R. Iraí, C. V. A. Vanina, M. P. R. Alexandre, A. G. Gustavo, L. S. A. Odélsia, E. A. A. Marcos, M. S. Yago, and R. T. F. Veloso, “Drying comparison of cassava flour through solar dryer and hybrid oven,” presented at the 7th International Conference on Power and Energy Systems (ICPES), Toronto, Canada Nov. 1–3, 2017.

[19] G. K. Jayatunga and B. M. W. P. K. Amarasingheb, “Drying kinetics, quality and moisture diffusivity of spouted bed dried Sri Lankan black pepper,” Journal of Food Engineering, vol. 263, pp. 38– 45, 2019.

[20] C. Tunckal and I. Doymaz, “Performance analysis and mathematical modelling of banana slices in a heat pump drying system,” Renewable Energy, vol. 150, pp. 918–923, 2020.

[21] Y. Guo, B. Wu, X. Guo, F. Ding, Z. Pan, and H. Ma, “Effects of power ultrasound enhancement on infrared drying of carrot slices: Moisture migration and quality characterizations,” LWT, vol. 126, 2020, Art. no. 109312.

[22] S. Charmongkolpradit and R. Luampon, “Study of thin layer drying model for cassava pulp,” Energy Procedia, vol. 138, pp. 354–359, 2017.

[23] S. T. A. R. Kajuna, V. C. K. Silayo, A. Mkenda, and P. J. J. Makungu, “Thin-layer drying of diced cassava roots,” African Journal of Science and Technology, vol. 2, no. 2, pp. 94–100, 2001. [24] S. Azhani, A. Hniman, N. Laehmad, S. Hanifarianty, P. Masniyom, T. Noipom, and M. Wae-hayee, “Sensory and physical properties of Pla-duk-ra (dried fermented catfish) at different conditions of drying,” International Journal on Advanced Science, Engineering and Information Technology, vol. 8, no. 4-2, pp. 1597–1603, 2018.

[25] L. Wu, T. Orikasa, Y. Ogawa, and A. Tagawa, “Vacuum drying characteristics of eggplants,” Journal of Food Engineering, vol. 83, pp. 422–429, 2007.

[26] K. Ragab, P. Zhongli, S, Adel, R. H. Bruce, and M. Sherief, “Moisture diffusivity of rough rice under infrared radiation drying,” LWT, vol. 44, pp. 1126–1132, 2011.

[27] S. Paengkanya, S. Soponronnarit, and A. Nathakaranakule, “Application of microwaves for drying of durian chips,” Food and Bioproducts Processing, vol. 96, pp. 1–11, 2015.

[28] S. Jena and H. Das, “Modelling for vacuum drying characteristics coconut press cake,” Journal of Food Engineering, vol. 79, pp. 92–99, 2007.

[29] H. F. Öztop and E. K. Akpinar, “Numerical and experimental analysis of moisture transfer for convective drying of some products,” International Communications in Heat and Mass Transfer, vol. 35, no. 2, pp. 169–177, 2008.

[30] I. Dincer and S. Dost, “Thermal diffusivities of geometrical objects subjected to cooling,” Applied Energy, vol. 51, no. 2, pp. 111–118, 1995.

[31] W. A. M. McMinn and T. R. A. Magee, “Diffusional analysis during air drying of a starch food system,” Developments in Chemical Engineering and Mineral Processing, vol. 5, no. 1–2, pp. 61–77, 1997.

[32] J. Crank, Mathematics of Diffusion, 2nd ed. London, England: Oxford University Press, 1975.

[33] E. K. Akpinar, “Determination of suitable thin layer drying curve model for some vegetables and fruits,” Journal of Food Engineering, vol. 73, no. 1, pp. 75–84, 2006.

[34] D. I. Onwude, N. Hashim, R. B. Janius, N. M. Nawi, and K. Abdan, “Modeling the thin-layer drying of fruits and vegetables: A review,” Comprehensive Reviews in Food Science and Food Safety, vol. 15, pp. 599–618, 2016.

[35] C. Chen, C. Venkitasamy, W. Zhang, R. Khir, S. Upadhyaya, and Z. Pan, “Effective moisture diffusivity and drying simulation of walnuts under hot air,” International Journal of Heat and Mass Transfer, vol. 150, 2020, Art. no. 119283.

[36] Association of Official Analytical Chemists, Official Methods of Analysis of the Association of Official Analytical Chemists, 15th ed. Washington DC: AOAC Inc., 1990.

[37] J. Duangchuen, S. Pathaveerat, S. Noypitak, and P. Jermwongruttanachai, “Effect of spray drying air temperature to the changes of properties of skimmed coconut milk powder,” Applied Science and Engineering Progress, vol. 14, no. 2, pp. 187–195, 2021, doi: 10.14416/j. asep.2020.04.009.

[38] T. Chungcharoen, S. Prachayawarakorn, P. Tungtrakul, and S. Soponronnarit, “Effects of germination time and drying temperature on drying characteristics and quality of germinated paddy,” Food and Bioproducts Processing, vol. 94, pp. 707–716, 2015.

[39] L. Hongyan, X. Long, Z. Y. MaMin, and Z. ZhaoXiaoyan, “Effects of drying methods on drying characteristics, physicochemical properties and antioxidant capacity of okra,” LWT, vol. 101, pp. 630–638, 2019.

[40] A. K. Bhardwaj, R. Kumar, R. Chauhan, and S. Kumar, “Experimental investigation and performance evaluation of a novel solar dryer integrated with a combination of SHS and PCM for drying chilli in the Himalayan region,” Thermal Science and Engineering Progress, vol. 20, 2020, Art. no. 100713.

[41] C. Ratti, Advances in Food Dehydration. New York: Taylor & Francis Group, LLC, 2009.

[42] K. Mounir, M. Haytem, L. Hamza, T. Zakaria, B. Younes, I. Ali, and L. Abdelkader, L. “Drying characteristics and kinetics solar drying of Mediterranean mussel (Mytilus galloprovincilis) type under forced convection,” Renewable Energy, vol. 174, pp. 833–844, 2020.

[43] G. K. Jayatunga and B. M. W. P. K. Amarasinghe, “Drying kinetics of black pepper dried in a spouted bed dryer with or without draft tubes,” International Journal of Manufacturing & Industrial Engineering, vol. 1, no. 2, pp. 6–10, 2014.

[44] A. Idlimam, C. S. E. Kane, and M. Kouhila, “Single layer drying behaviour of grenade peel in a forced convective solar dryer,” Revue des Energies Renouvlables, vol. 10, no. 2, pp. 191–203, 2007.

[45] A. Midilli, H. Kucuk, and Z. Yaper, “A new model for single layer drying,” Drying Technology, vol. 20, pp. 1503–1513, 2007.

[46] P. Sutar and S. Prasad, “Modeling microwave vacuum drying kinetics and moisture diffusivity of carrot slices,” Drying Technology, vol. 25, no. 10, pp. 1695–1702, 2007.

[47] S. Kaleemullah and R. Kailappan, “Modelling of thin-layer drying kinetics of red chillies,” Journal of Food Engineering, vol. 76, no. 4, pp. 531–537, 2006.

[48] N. J. Singh and R. K. Pandey, “Convective air drying characteristics of sweet potato cube (Ipomoea batatas L.),” Food and Bioproducts Processing, vol. 90, no. 2, pp. 317–322, 2012. [49] D. Ghanbarian, M. B. Dastjerdi, and M. Torki- Harchegani, “Mass transfer characteristics of bisporus mushroom (Agaricus bisporus) slices during convective hot air drying,” Heat and Mass Transfer, vol. 52, pp. 1081–1088, 2015.

[50] B. F. Olanipekun, T. Y. Tunde-Akintunde, O. J. Oyelade, M. G. Adebisi, and T. A. Adenaya, “Mathematical modelling of thin-layer pineapple drying,” Journal of Food Processing and Preservation, vol. 39, no. 6, pp. 1431–1441, 2014.

[51] P. S. Madamba, R. H. Driscoll, and K. A. Buckle, “The thin layer drying characteristic of garlic slices,” Journal of Food Engineering, vol. 29, no. 1, pp. 75–97, 1996.

[52] Y. A. Cengel, Heat and Mass Transfer, 5th ed. Singapore: McGraw-Hill Education, 2014.

[53] N. P. Zogzas, Z. B. Maroulis, and D. Marinos- Kouris, “Moisture diffusivity data compilation in foodstuffs,” Drying Technology, vol. 14, pp. 2225–2253, 2007.

[54] E. Mirzaee, S. Rafiee, A. Keyhani, and E. Djomeh-Emam, “Determining of moisture diffusivity and activation energy in drying of apricots,” Journal of Agricultural Engineering Research, vol. 55, no. 3, pp. 114–120, 2009.

[55] M. Khanali, A. Banisharif, and S. Rafiee, “Modeling of moisture diffusivity, activation energy and energy consumption in fluidized bed drying of rough rice,” Heat and Mass Transfer, vol. 52, pp. 2541–2549, 2016.

Full Text: PDF

DOI: 10.14416/j.asep.2021.10.008

Refbacks

  • There are currently no refbacks.


Copyright © 2024 by King Mongkut’s University of Technology North Bangkok. All rights reserved.